5555 TX 4
1859 PCK 9

5555
This transmitter is used wherever an additional switch is required to control electrical loads without laying new wires.

Installation
The device is installed where control is required, within radio range with respect to used receivers and bearing in mind that it features a built in antenna and cannot operate inside metal housings. The very reduced dimensions allow to install it directly in the junction boxes of the electrical system, but not with metal plates, key.

1859
This 1-way remote control is useful to group different functions in one portable device. In fact, it allows to control the alarm control panel, any automatic gates, switching on of lights and other automations.

5555 TX 4 1859 PCK 9

5555
Size (h×l×d)
40×18×33 mm

Weight
0.03 Kg

Environmental class
2 - Indoor

Housing
ABS


1859
Size (h×l×d)
40×33×18 mm

Weight
0.03 Kg

Environmental class
2 - Indoor

Housing
ABS

Power Supply
5555: 230V AC - negligible power use.
1859: 3 V with 1 lithium battery CR2032 Battery life: approximately two years with standard use.

Radio transmission
EU compliant 433 MHz single frequency operations. Range is suitable for device’s intended use.

Monitoring and Testing
System’s check is performed with every operation and validated by command confirmation.

5555 Features
Transmission of 4 different commands via radio using any external switch.

1859 Features
- total (key 1) or partial (key 3 - zones A+B) arming command to control panel, or disarming (key 2).
- alarm control to control panel or home automation activation to RX receivers (selected opportunely programmable keys ).

Local signals
Transmission LED.