5515SB/SM Sensor Soft HT

Miniaturized door/window opening sensor

This device was built to protect fixtures against opening (perimeter protection). Programming from the control panel is easy and straightforward and is performed by installing the device’s battery. Sensor Soft HT is attached to the fixture jamb with glue, positioning the magnet on the mobile part of the fixture, so that the alarm is set off when it moves away from the main body of the sensor. The best features of this device are its compact size and that it does not require screws for installation allowing for a very quick installation that does not require tools. This unit is unobtrusive once installed.

It signals the opening of the door or window it is installed on.

Size (h×l×d)
97.3×28.5×13.7 mm

40×12.5×13.7 mm

Environmental class
2 - Indoor


Power Supply
Lithium Button battery CR 2450 – 600 mA 3V or an equivalent one. Battery life: approximately two years with standard use. (4 openings a day). Battery life considerably decreases when window/door is often opened.

Tamper protection
Reports when the device’s battery compartment is opened.

Radio transmission
EU compliant Dual Band frequency operations. Range is suitable for device’s intended use.

Monitoring and Testing
Device operation can be checked at any time by placing the control panel in TEST mode, setting off an alarm and checking reception.

Alarm when the mobile part moves away from the fixed part, it offers the possibility of signaling any fixtures that have been left open. In addition to setting off the alarm, Sensor Soft reports tampering as it occurs, its operating conditions (supervision) and low battery levels every 40 minutes. These signals are also reported by the control panel.

Aesthetic solutions
The device’s housing (and its magnet) are available in white, brown and grey; to camouflage the device it is possible to paint it with acrylic or water-based paints (no nitro, no solvents).